Buy 1 impact window, get 1 FREElimited time onlyClaim offer

Call (954) 637-7029 Free estimate

What the High Velocity Hurricane Zone means

Miami-Dade and Broward are in the High Velocity Hurricane Zone. Palm Beach County is not, but your window and door project still needs products and installation details suited to your home.

By the USA Windows & Doors team · · 5 min read

Installer examining a window opening beside a sliding glass door at a South Florida home

Start with your property's location

The High Velocity Hurricane Zone, or HVHZ, is Miami-Dade and Broward counties. Palm Beach County is outside the HVHZ but inside the wind-borne debris region. That distinction matters when we select impact windows and doors and prepare the paperwork for your openings.

For you, the practical question is not simply whether a window is impact-rated. It is whether the exact window or door, installed as proposed, is approved for your location and suited to your house.

We often see homeowners comparing similar-looking windows without knowing that the approval documents describe different uses. The glass may look alike, but the approved frame, configuration and installation details can differ.

Start with your property address and the openings you want to replace. Check with your building department about the local submission requirements. If you own a condo or belong to an association, ask your association about its approval process before ordering.

In Miami-Dade and Broward, confirm HVHZ approval

Products used in the HVHZ carry a Miami-Dade Notice of Acceptance, called an NOA, or a Florida Product Approval for the HVHZ. A general statement that a product is approved in Florida is not enough to explain whether it belongs in your project.

Ask us to show you the approval for the proposed product and explain how it matches your opening. The paperwork should describe the actual assembly being ordered, not just a similar window from the same product family.

Useful questions include:

  • Does this approval cover use in the HVHZ?
  • Does it cover the proposed window or door configuration?
  • Does the selected glass match the approval?
  • Which installation details apply to the wall around this opening?
  • Are there limitations that affect the proposed installation?

A sliding glass door and a fixed window can need different supporting documents even when they are going into the same room. Treat each opening as part of the project review, not as an interchangeable item on a shopping list.

If you want help identifying what is attached to an installed product, read our guide to reading impact window labels. The label is useful, but it does not replace the project paperwork.

Palm Beach still needs a site-specific match

Being outside the HVHZ does not mean you can choose any impact-rated window or door. In Palm Beach County, the product selection still needs to account for the property's wind-borne debris exposure and the requirements for the particular opening.

Do not assume that an HVHZ approval automatically settles every question, either. An approval describes permitted uses and installation conditions. We still need to match those conditions to your home.

We look at the opening, the surrounding wall and the proposed assembly together. A wide patio opening, an upstairs bedroom window and a front entry may call for different selections or installation details.

When you compare proposals, ask for the exact products and the applicable approval documents. A description such as “impact windows throughout” leaves important choices unexplained. You should be able to understand what is being supplied and how the paperwork supports that selection before placing the order.

Gloved hands beside an exposed impact window frame attachment before interior trim is installed
The exposed frame attachment area remains visible before interior trim covers the opening.

Make the permit package match the work

The permit package should tell a consistent story: which openings are changing, what is going into them and how the assemblies are being installed. A product approval is part of that story, not the whole file.

At USA Windows & Doors, our own crews do the installation, and we handle permits, engineering and inspections. We want the product selection and field work to follow the same approved plan.

Before installation, ask us to walk you through these items:

  • Opening locations: A clear way to identify each window and door included in the work.
  • Product selections: The proposed styles, configurations, glass and frames.
  • Approval documents: The documents supporting those exact selections.
  • Installation details: The applicable attachment details and any engineering needed for the project.
  • Association paperwork: Any separate approval your association requests.

Association approval and building department review are separate matters. Ask your association about appearance, frame color and submission requirements. Check with your building department about the permit process for your address.

If you change a window style or door configuration after the paperwork is prepared, tell us before the order proceeds. A change that looks minor from inside the room may need a different approval document or a revised submission.

Plan inspections around the installation

The approval document does not install the window. The frame still needs to be attached to the surrounding structure using the applicable details, and the finished opening needs careful weather sealing.

On South Florida houses, we often find that old trim or finishes conceal the edges of an opening. Once the existing unit comes out, the crew can see the condition of the supporting material more clearly. If that condition differs from the plan, we need to address it before proceeding with the affected work.

Ask us which inspections apply and when the inspector needs access. Check with your building department about its required inspection sequence. Do not arrange to cover attachment areas with new trim or finishes until we confirm that the work is ready for that step.

Keep access clear around the openings and tell us about association access restrictions before installation starts. These practical details help us coordinate the crew's work with the inspection schedule without making assumptions about what can be concealed.

Keep the completed opening records together

After the project, keep the product approvals, permit records, inspection results and any project engineering in the same folder. Ask us how to identify which documents belong to each opening.

If you are buying a home, ask the seller for those records rather than relying only on a description that says the house has impact windows. If records are missing, check with the building department about what is available. A visual check alone cannot establish the full approval and installation history.

The county boundary tells us which approval path to check. The complete project file explains what was selected, how it was intended to be installed and what inspection records are available.

Start with a free in-home estimate, or call (954) 637-7029 to review your openings and paperwork.

Thinking about impact windows or doors?

Free in-home estimate across Miami-Dade, Broward and Palm Beach. No deposit, no obligation.